White Reinforced Accessories

Installing a white roof requires precision and the right tools. That’s why RoofKit offers a selection of high-quality white membrane accessories for the installation of your white reinforced roof. From white membrane adhesives to essential primers, seam kits, patch kits, and caulking, our comprehensive range of white membrane roofing tools ensures you have compatible tools at your disposal.

RoofKit is your one-stop solution to help enhance the longevity and performance of your roofing projects. View details and additional information below on each of our accessory products.

We’re dedicated to providing you with the tools and service you need without the hassle. When you’re ready, feel free to contact us for more detailed information on how RoofKit can help you with your roofing project—we’re always available to help.

GET PRICING

White Reinforced Roofing Membrane

Commercial-grade 45 mil; resists moisture, ozone, and ultraviolet radiation.

Sizes:

  • 6’6” x 20 ft rolls (2 per tube)
  • 10 ft x 20 ft rolls
  • 10 ft x 100 ft rolls

Caution:

The White Membrane is slippery, especially when wet, dusty or covered with snow, frost or ice.

See additional cautions and warnings on page 3 & 4 of the White Membrane Pocket Application Guide.

Important Notice About Water Vapor or Condensation:
Control of water vapor and subsequent condensation is the responsibility of the person designing the roofing assembly. Exposure of the roof to temperatures below the dew point temperature of the air inside the building will cause condensation to form within the roofing assembly. Condensation forming within the roofing assembly and dripping into the building is not a roof leak. The person designing the roofing assembly and the person installing the roofing assembly must use proper water vapor control measures when designing and installing the roofing assembly to prevent condensation from forming within the roofing assembly.

GET PRICING

White Membrane Water Based Bonding Adhesive

Adheres white membrane to suitable substrate. High coverage rate, environmentally safe.

Sizes:

  • 3.5-gallon pails or 1-gallon pails
GET PRICING

White Membrane Seam Tape

Seams two white membrane sheets together. Heavy duty, easy to use, with no caulking required.

Sizes:

  • 3” x 50’ rolls, 1 roll per box
GET PRICING

White Membrane Cover Strip

Peel and stick tape for completing metal edge detail. Also for patching long tears in membrane.

Sizes:

  • 6” x 50’ rolls, 1 roll per box
GET PRICING

White Membrane Seam Kit

For seaming up to 25 feet of membrane.

Sizes:

  • 25 ft. roll of 3” Seam Tape, 1 pint Primer, scrubbie pad, seam roller, and 2 wipe cloths
GET PRICING

Patch & Corner Cover Kit

Used for repairing small cuts and holes in white membrane.

Sizes:

  • (6) 8” circular peel and stick patches, 1-pint seam primer, scrubbie pad, wood roller and wiping cloths.
GET PRICING

White P/S Pipe Boot

Seals pipes, stacks or vents up to 6” in diameter.

Sizes:

  • 1 boot, 1 clamp per box

White Termination Bar

For perimeter and edge terminations.

Sizes:

  • 10 ft. lengths, 25 lengths per tube
  • Aluminum also available

White Caulk

For sealing seams and terminations.

Sizes:

  • 10.3 oz. tubes

Compatible “Blue Label” RoofKit Products:

GET PRICING

Seam Primer

Used for cleaning and priming all roof membrane surfaces prior to installation of RoofKit products including Tapes, Multi-Purpose Adhesive, Caulk, Corner Covers and Pipe Boot

Features:

  • One step product for cleaning and priming roof membrane
  • Required for use with all Tape products
  • Fast drying for quick installation of adhesives or tapes
  • Promotes uniform adhesion of Tape Products

Sizes: (Individual units available through our online store)

PRODUCT SIZE
U/M WEIGHT
UNIT OF MEASURE
PACKAGING
1 GALLON CANS
32 LBS
CASE
4/1 GALLON CANS PER CASE
1-PINT CAN*
9 LBS
CASE
6/1 PINT CANS PER CASE
*1-PINT CAN ALSO INCLUDED IN ROOFKIT SEAMKIT AND PATCH KIT

Caution:

RoofKit Seam Primer REQUIRES the use of solvent-resistant gloves when using this product. These materials contain petroleum distillates and are extremely flammable. Care MUST be taken to avoid open flames. Do not smoke when using these products. Properly dispose of used rags and scrubbie pads once they have dried out. Store in dry location away from heat and sunlight. READ ALL CAUTIONS AND WARNINGS IN THE POCKET APPLICATION GUIDE PAGES 2-3.

In the event that this product is not available in your area, please call technical support at 1-614-729-7888 for additional information on alternative products and installation procedures.

GET PRICING

Screws and Plates

Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation

Features:

  • Convenient packaging of screws and plates in one box
  • Heavy duty professional strength products

Sizes:

PRODUCT SIZE
U/M WEIGHT
UNIT OF MEASURE
PACKAGING
100 – 3” SCREWS AND PLATES
30 LBS/CS
BOX/100
5 BOXES TO A CASE

Caution:

Sharp edges on plates and sharp points at end of screws. READ ALL CAUTIONS AND WARNINGS IN THE POCKET APPLICATION GUIDE.

GET PRICING

Waterstop

Used to prevent water infiltration UNDER the membrane at terminations, pipe boots, and drains. Acts as extra protection for your roof.

Features:

  • A gray siliconized gasket caulk that is very sticky – use caution when opening tubes and during application
  • Does 20 Lineal feet per tube

Sizes: (Individual units available through our online store)

PRODUCT SIZE
U/M WEIGHT
UNIT OF MEASURE
PACKAGING
10.5 OZ TUBES
11 LBS
CASE
10 TUBES / CASE

Caution:

These materials contain petroleum distillates and are extremely flammable. Care MUST be taken to avoid open flames. Do not smoke when using these products. Safety Data Sheets (SDS) are available for these products and should be consulted. Store in dry location away from heat and sunlight. READ ALL CAUTIONS AND WARNINGS IN THE POCKET APPLICATION GUIDE PAGES 2-3

GET PRICING

4′ 10″ Aluminum Termination Barr

Used for horizontal or vertical termination of the membrane at walls and gutters or over the edge of the roof surface

Features:

  • Aluminum extruded bar with pre-drilled holes for easy installation
  • Aluminum will not rust or corrode
  • Each pre-drilled hole must be filled with the proper length screw
  • RoofKit Waterstop is usually installed under the White Reinforced membrane just behind the Termination bar to prevent any water infiltration
  • Caulking channel already provided for easy caulk installation

Sizes: (Individual units available through our online store)

PRODUCT SIZE
U/M WEIGHT
UNIT OF MEASURE
PACKAGING
4′ 10″ LENGTH
23 LBS
TUBE
4′ 10″ BAR 25/TUBE

Caution:

Sharp edges at the ends of the bar. READ ALL CAUTIONS AND WARNINGS IN THE POCKET APPLICATION GUIDE PAGES 2-3.